Is Automatic Bed Leveling Worth It in 3D Printers in 2022?

Is automatic bed levelling worth it in 3D printers?

The latest craze to hit the 3D printing community is the automatic bed levelling feature in most 3D printers.

Whether you’re a beginner or an expert, you’re probably interested in bed levelling in your 3D printer. It’s a great, time-saving feature, but is it worth the cost? And is it really worth the cost for a beginner?

Some people are absolutely convinced that this is the one feature you need, and that you must buy it immediately. Others think it’s overpriced, or that it’s more trouble than it’s worth.

If you’re still on the fence, now’s the time to stop reading and decide for yourself.

Here’s everything you need to know about automatic bed levelling in 3D printers.

What does Automatic bed level do?

The purpose of automatic bed levelling is to provide a well-levelled foundation for your 3D printer. The printer’s nozzle is then moved along the bed, sensing if there are any high or low points.

If there is, the nozzle will raise or lower itself so you can print without any gaps.

How does auto bed levelling work?

Automatic bed levelling works in three different ways.

One way, a sensor measures the distance between the extruder and the bed of your 3D printer.

Another way is to measure how much the nozzle is tilted, which can be done by checking whether or not it’s on the same level as a fixed point in relation to the bed.

The third way is when your 3D printer uses an algorithm to determine if your extruder is too high or low and adjusts it for you.

How often should I bed level?

The frequency of bed levelling can depend on the type of filament you use.

For example, if you print with PLA, you probably won’t need to bed level as often as other filaments like ABS.

PLA is more forgiving when it comes to bed levelling, while ABS may require more constant work.

Additionally, the thickness of your 3D print will also affect how often you need to bed level.

For example, if you are printing a really thin piece that takes a lot of time and filament to complete, it may be worth the time to do a full bed leveling each time.

Some people recommend doing it after every 10-20 hours of printing. This can take some adjusting on your end but it should help avoid any potential problems in the future.

If your filament has any moisture in it or isn’t stored properly, this could cause problems with your 3D printer down the line and lead to poor quality prints from then on out.

A few pro tips for proper storage:

  • Always keep filament away from sunlight and heat
  • Store PLA in an airtight container or sealed baggie
  • Keep ABS in a sealed jar or container with a desiccant pack (i.e., silica gel) – this will prevent moisture from coming into contact with the plastic
  • Keep filament away from sharp objects (this means scissors too!)

Pros of Automatic Bed Levelling

  • It saves you time
  • It saves you money since it can be expensive to send printers in for repairs
  • You get a more accurate print
  • You don’t have to calibrate the bed every time you want to print, which can be tedious and time-consuming

Cons of Automatic Bed Levelling

If you’re looking to save money and still get a 3D printer with a levelling feature, then you might want to avoid the automatic bed levelling.

It’s not included in most models of 3D printers, so this is one feature that will cost you extra. Auto leveling is usually an expensive feature that can add $200-$400 to the cost of your printer.

Consumers who purchase automatic bed levelling have cited that it’s a nice-to-have, but not for beginners.

They mention that it doesn’t work as well as advertised and that it requires more maintenance than other features like heated print beds or dual extruders.

There are also some cons for advanced users who purchase auto leveling in their printer: the quality of prints suffers and there are additional technical issues.

These problems arise from having to calibrate the system frequently and problems with layer adhesion when printing on uneven surfaces which causes warping.

With these technical issues, come extended downtime in your workflow. Owners of printers with automatic bed levelling say they often have to stop what they were doing to recalibrate their printer up to 5 times per day.

What is the Best bed levelling method?

Bed levelling is an important part of the 3D printing process, but it’s not all that complicated. There are two main types of bed levelling: manual and automatic.

Manual bed levelling is easy, and it’s what most people use. You can just home your printer to make sure the nozzle points to the center of your print bed, then level it with a piece of paper or another flat object.

If you’re using a heated print bed, this is even easier! Just turn down the heat until it stops steaming and then place your object on the bed and see if it stays put.

The problem with manual bed levelling? It takes time and patience, which not everyone has in abundance. Plus, if you have a heated print bed, you also have to wait for it to cool down before you can start printing again.

An automatic bed levelling system is a more complicated system than manual levelling.

It uses sensors that detect when your extruder hits the build platform surface; these sensors help calibrate your 3D printer so that you don’t need to manually level it.

And while automatic bed levelling is expensive at first, over time they save money by saving time (and therefore money).

Keep in mind that there are different types of automatic systems — some only work with heated beds, others work with non-heated beds as well as heated ones. The latter type costs more initially but

Does Prusa i3 have auto bed leveling?

Yes, the Prusa i3 has this feature.

If you want a 3D printer with auto bed levelling, then you need to purchase the Prusa i3. I’ve heard horror stories about people having to manually level their beds for hours on end just to get decent prints.

That’s not something you have to worry about with the Prusa i3 because it’s been designed with automatic bed leveling in mind.

This means that all you have to do is start your print and walk away! It will do all of the work for you and make sure your prints come out well every time.

Final Thoughts

Automatic bed levelling saves you time by letting your prints print without having to manually level them. It’s a great, time-saving feature, but is it worth the cost? And is it really worth the cost for a beginner?

Some people are absolutely convinced that this is the one feature you need, and that you must buy it immediately. Others think it’s overpriced, or that it’s more trouble than it’s worth.

If you’re still on the fence, now’s the time to stop reading and decide for yourself.

As a lover of technology. Kelvin spends most of his tinkering with stuff and keeping up to date with the latest gadgets and tech.

Get our Free eBook When You Signup

Our ebook contains everything you need to know about laptops. It only takes 15 minutes or less to read! Also, get the latest updates in tech.