On Oculus Quest 2, the Limited Connection error message is one of the murkiest errors you could see. Additionally, users are equally uncertain about the error’s reasons. When you get the Limited Connection issue on your Quest 2, you attempt to play an online virtual reality game, download one, check your profile, or do another internet-dependent task. The limited connection may, in general, refer to one of three things:
- Although you could connect to your WIFI router, you did not give your Quest 2 headset a valid IP address.
- You have successfully connected to the WiFi router, but the router does not have an internet connection.
- You’re connected to the router. Yet, the signal is too faint, or the internet speed is too poor to make significant connections.
Limited Connection Oculus Quest 2? Try These Fixes
As mentioned above, the three situations might arise due to several underlying variables. We’ll look at how to resolve the issue when it arises now that you know the primary reasons why the Limited Connection error on your Quest 2 occurs and how to prevent some of them. Oculus Quest 2 limited connection? Try these fixes
1. Restart The Router
Restarting the router should be your first step if you have a Limited Connection issue on your Quest 2. The easiest method to eliminate any flaws or kinks that may be the root of the issue is to do this. Restarting will compel your network to grant your headset’s request for an IP address and issue one.
To guarantee that all potential sources of the issue are addressed before restarting the router, please adhere strictly to the following procedures:
- Disconnect the router’s power supply and turn it off.
- Hold off. This is to ensure that the router is fully powered down and cooled.
Ensure your router is always positioned at least one foot above the surface. Also, avoid placing your router on or near any heat-generating equipment. Please try the next step below if the issue still exists after restarting the router.
2. Set Up A Hotspot On Your Phone
You might try connecting your Quest 2 to the hotspot on your phone as WiFi. To determine whether your router is the source of the problem, do this. Even though it’s not a long-term solution, using a phone will provide you with the internet connection you need at the moment.
For this:
- Verify that mobile data is activated on your phone and that you have a mobile data subscription.
- To access the Quick Settings menu on your phone, swipe down from the top of the screen.
- Select Hotspot or Personal Hotspot to turn it on.
- Next, press the Oculus controller button on your right.
- Click on Quick Settings.
- Decide on WIFI
- Pick a name for your portable hotspot.
- Key in the password and click Connect.
Here is a guide if you have never set up a hotspot on your phone.
On iOS:
- Open the Settings app on your phone in step 1.
- Pick Cellular
- Choose Personal Hotspot or Settings.
- Choose “Personal Hotspot”
- Switch to Allow Other Users to Join
- The password will be created and shown on the same window automatically.
For the Android OS:
- Open the Settings app on your phone in step 1.
- Select Internet and Network.
- Decide between Hotspot and Tethering.
- Switch the mobile hotspot feature on.
- Click the Set Up Hotspot option.
- Type in the chosen password to save
3. Enter Quest 2 Times Manually And Turn Off The Network Provided Time
You may remember that it might bring on the Limited Connection error by date and time that were wrong. It may seem unusual that your Quest 2 timing is now off. The fact is that your headset sets its date and time using the time that is given by the network. It defaults to the factory time and date when it loses contact with the network time servers.
Carefully follow the instructions below to change the date and time. Do so also to prevent this from occurring again in the future:
- Make sure SideQuest is open on your computer, and the green connection symbol is visible in the upper left corner of the SideQuest home screen.
- Select the “Installed Apps” icon (3 rows of 3 dots each)
- Toggle to activate on the next page that appears. Show Each
- Enter “Settings” in the search box.
- Choose com.android.settings from the search results and click the gear icon.
- Choose Launch App from the Manage App menu.
- Put on the Quest 2 headset.
- You’ll see a window like the settings window on an Android phone.
- Scroll to System using the controller, then choose it.
- Choose the Time and Date.
- Disable using a toggle. Use the time provided by the network
- Type the correct date and time.
- To close the window, hit the B button repeatedly or click the X in the bottom left corner of the screen.
- Switch your Headset back on
4. Form An Organization
To activate Quest 2’s Developer Mode, you must first form an Organization. You won’t be able to utilize SideQuest effectively without developer mode enabled. Enter your Quest 2 username and password at dashboard.oculus.com. Accept the contract’s provisions, then complete the organization’s formation procedure.
- For the Windows operating system, download and install the necessary drivers
- Obtain the Windows drivers for your Quest 2 headset by visiting developer.oculus.com/downloads/package.
- Right-click the android winusb.inf file. Next, choose Install after extracting the downloaded ZIP folder.
- Turn on the Quest 2 developer mode.
- On your phone or computer, launch the Oculus app.
- Pick Settings
- Decide between More Settings and Advanced Settings.
- Toggle Developer Mode to make it active.
- Relaunch Quest 2
- Turn off the Oculus app’s lock pattern.
- Launch the Oculus on your device.
- Pick Settings
- Pick a quest.
- Choose More Settings
- Choose Disable Unlock Pattern and click it.
Here is a guide for those who have an active unlock pattern:
- Launch the Oculus app.
- Pick Devices
- Decide on a Quest 2 headset.
- Select Unlock Pattern in the headset’s settings.
- Choose Discard Unlock Pattern.
- Type your Oculus PIN and press “Submit”
5. Join USB And Turn On Debugging
Attach the PC and USB cord. Instead of the Quest 2 cord, it is preferable to utilize a functioning phone’s USB port.
Don your headphones and choose “Always allow from this computer.” Next, choose “OK to Allow.”
6. Use A Hard Reboot
As we previously said, your Quest 2 headset may have had a brief malfunction that resulted in the Limited Connection message. A hard reboot enables the headset to remove any software and hardware issues that may have contributed to the issue. Additionally, it will guarantee that every software required for your Quest 2 to operate correctly is loaded into memory.
Do a hard reset as follows:
- Simultaneously press and hold your headset’s power and (-) volume keys.
- Hold the button down until the boot menu screen shows.
- Use the volume controls to browse and choose the Boot Device
- To choose the Boot Device option, press the Power button.
After around ten seconds, your headset will switch between being off and being on. Please restart and check to see if the Limited Connection problem has disappeared.
7. Manually Upgrade Headset Firmware
Your Quest 2 must be switched on, connected to the internet, and kept in sleep mode for enough time for the updates to download and install before it may update itself. Having all these requirements satisfied is unusual for many users. They must manually upgrade Quest 2 as a result.
The interruption of the update installation process is another update-related issue that could result in the Limited Connection error. For instance, if you turn off your headset while updates are installed, this might lead to a malfunction and the Limited Connection message on your headset.
To manually upgrade your headset:
- Connect a hotspot to your headset.
- Don the Oculus VR headset.
- Use the suitable controller’s Oculus button.
- Select the Clock icon from the menu that opens.
- Choose Settings
- Choose System
- Click on Update Software.
- If an update is available, choose it in the upper right corner.
Or
- Connect a hotspot to your headset.
- Don the Oculus VR headset.
- Use the suitable controller’s Oculus button.
- Choose Settings
- Click on About.
- Click Updates, Download, or Install.
8. Increasing WIFI Speed
Here is how you may improve the issue, keeping in mind all the potential reasons for slow internet speed that we discussed previously in the article:
9. Only Use 2.4 GHz Or 5 GHz Frequency In The Appropriate Manner.
To establish the most substantial network connection, your headset will continuously attempt to switch between 2.4GHz and 5GHz. Your headset may sometimes lose connectivity as a result of this.
Although it’s not perfect, Meta claims they’re trying to improve it. However, it is preferable to disable the other frequency in the meantime and compel your Quest 2 to utilize the first.
Please remember, though:
- 5GHz gives substantially faster speeds but necessitates a 40-foot minimum indoor distance between your router and gaming area. Speed may exceed 1300 Mbps.
- The indoor range at 2.4GHz is up to 150 feet. However, the maximum speed is just 450 to 600 Mbps.
As a result, you must determine the ideal distance and speed for the circumstances.
10. Remove Other Devices From The Router Connection
The speed of each device will decrease the number of devices currently connected to your network. This is because they must share the router’s available bandwidth. Please try again once fewer connections are active on your router.
11. Remove Unconnected Radio-Using Devices From The Router
Keep baby monitors, Bluetooth devices, cordless phones, and similar equipment far from the network to prevent interference with the router signals that reach your Quest 2 headset.
Set Network Aside and Connect Again
The router provides a connection certificate to your Quest 2 headset when it establishes a connection with it. A bug may sometimes bring on a Limited Connection issue in the network or headset.
To get a fresh certificate, you must re-connect to the router. For that:
- Press the Oculus controller button on your right.
- Choose Quick Settings.
- Decide on WIFI
- Double-click the WiFi connection you are using.
- Click forget.
- To rejoin, choose the WIFI option once again and enter the password.
- Verify the password once again before choosing to connect.
12. Factory Reset Headset
You may need to reset your headset if reconnecting your Quest 2 to the network does not cure the issue. Your headset’s settings and bugs that could be obstructing good internet access will be removed after a reset.
You may use Oculus Cloud to backup your games and other applications before conducting a factory reset:
- Obtain your hotspot’s connection information.
- Put on your headset and activate Oculus by pressing the button on the suitable controller.
- Choose Quick Settings under the Universal Menu.
- Choose Settings
- Choose System
- Pick Backup
- Click the toggle to enable Cloud Backup.
After the backup is finished, follow these instructions to restore factory settings:
Using a headset to reset:
- Verify that your headset is wholly charged.
- Disconnect your headphones.
- Hold your power and volume down keys on your headset simultaneously.
- Wait until your headset’s startup screen appears.
- Press the power button to choose Factory Reset by using the volume buttons on your remote to highlight it.
- Highlight Yes, Erase, then Factory Reset using the volume button.
- To choose it, press the power button.
Using a phone app, reset:
- Verify that your Quest 2 has a full charge.
- Launch the Oculus application on your phone.
- Choose Devices
- Decide on an Oculus Quest 2 headset.
- Choose Advanced Options
- Choose “Factory Reset”
- Verify Reset
13. Get In Touch With Oculus
Please get in touch with Oculus for further help if a complete factory reset doesn’t fix the problem. You can ask for a refund, a replacement, or a repair if your headset is still covered by its 2-year guarantee. Additionally, jot down the 14-digit serial number on the headset’s battery compartment and provide it to Oculus support.
FAQ’S
1. On Oculus Quest, What Does Limited Connection Mean?
The difference between a smartphone connecting to Wi-Fi and a phone not being connected to the internet utilizing the smartphone’s connection to Wi-Fi is a restricted internet connection. As a result, the Wi-Fi connection is unreliable. The Wi-Fi network will still be helpful in this situation. Still, you won’t be able to access the internet to use your applications or websites.
2. Why won’t Oculus Quest 2 Connect and What Do I Do?
Ensure your headset is in place, close to the room, and turned on. Ensure the strength of your Wi-Fi network. To fix the problem, you may need to go closer to your wireless routers (equipment for making an internet connection).
3. Why Does My Quest 2 Continue To Lose Connectivity?
Your inconsistent use of two WiFi networks frustrates you when playing Oculus Quest. The two bands utilized to transmit data are 4 GHz and 5 GHz. If this happens, you will be disconnected from the Rec Room and keep seeing error messages. Ensure your VPN system is set to either one band or another (preferably 5 GHz).
4. How Can I Fix The Oculus Quest’s Connective Problem?
Rebooting your device may occasionally solve issues while attempting to set up your Oculus Quest 2 headset. I must do these actions to resume my quest. After turning on your headset, press the power button on the right side and wait until the screen prompts you to switch it off.
5. Why Doesn’t My Oculus Quest Work?
Hard reset the pc to restart it. The screen may go dark if the power button is not kept down for at least 10 seconds after pushing it. Although you can often manage the Oculus Quest by holding down the button, it won’t be able to carry out routine operations like restarting after losing consciousness. Use the bootloader command to start.
6. Why Can’t My Oculus Connect?
You must maintain your PC and Rift headset up to current. It may be the integrated graphics card if you have issues utilizing either. The Oculus driver should be updated and installed.